• Follow Us:
  • ICMJ on Facebook
  • ICMJ on Twitter
ICMJ's Prospecting and Mining Journal - Online Magazine
Search: Search
  Entire Site Articles Only
Login | Not A Member? Subscribe   FAQ   Contact Us

Garrett Electronics - trusted by real miners & prospectors!
For Sale/Wanted » Equipment

How do I place a Classified Ad on this Site?

FOR SALE: 4x3 Denver SRL pump, 7.5 HP; 5x4 Denver SRL pump, 25 HP; 48” Sweco SD screen, Denver drives #12, 48” Dorr Oliver thickener mechanism. MILLER EQUIPMENT, Tel: (865)475-7977; Send email.

MJantf

Email the owner of this Mine Market Classified Ad


4x4 Ball Mill on stand, new rubber liners, new pinion.  --  $22,000
 
General Electric portable X-Ray machine, battery operated  --  $1,500
 
Stutenroth Impact Mill, new condition, 5TPH, volts 208 230/460, with stands. Located in Lovelock, NV  --  $7,000
 
Joshua Henry 5-stamp mill mfg. in S.F. in 1920s & 1930s. Located in Lovelock, NV.  --  $7,000
 
(2) New Krebs cyclones, model D4B-12-827, s/n 39709. Located in Reno, NV. --  $2,000 ea.
HAROLD BOND
(775)786-2080
(775)771-5288 cell
BJantf

FOR SALE—Universal Air Trammer. 18 inch ga. $5,000. Gardner-Denver air hoist, reversible, 100’ of 3/8” cable, sinking bucket—$2,500. (775)427-4111; (775)427-2696.
JJantf

RENOCELL DIRECT ELECTROWINNING SYSTEMS

Precious Metal Recovery Directly from Dilute (<10 ppm) Leach Solutions Using Advanced Electrowinning Technology.

See our ad on page76.
Send email or go to:
Phone: (510)748-9993

Apr6


 

Email the owner of this Mine Market Classified Ad


WANTED: LAB-SIZE JAW CRUSHER
Suitable for demonstration stamp mill. CASCADE MOUNTAINS GOLD, (503)606-9895.
BJan1

24’ NOME 
OCEAN GOLD DREDGE
7”x30’ hose. 23hp Vanguard with Dahlke 1200 pump. Sump at end of sluice box for extra fine gold recovery to side box. Wheel house with Side Scan Sonar for clear bottom viewing on Lowrance 10” GPS screen with 5 years of Gold Waypoints. Marked Gold zones may replenish or be pushed in all directions for missed gold. Better than poking blindly. Full face mask with diver com. Hot water. 90hp Evinrude. 70 years old and need to retire. $19,000. (916)862-5082.
aGJantf

18”x6’ TROMMEL, OSCILLATING sluice, DC motor, 460 watts solar panels, solar controller, batteries, $2,100. (406)547-2266. Montana.

HJan3


GOLD DREDGE SALE
(Units located in the Carolinas)
 
2” mini - demo                            $   780
2-1/2” demo unit                         $1,180
3” special dredge                       $1,180
4” river dredge (located in Calif.)  $1,380
 
Ph#: (864)427-4684 or or send email
DJan2

Email the owner of this Mine Market Classified Ad


2 LIKE-NEW FALCON SB250 Concentrators—$12,500 ea. (Pd $35,000 ea.) Extrac-TEC HPC 10—$8,000. 10x16 AW Jaw Crusher—$8,000. 8-Ton Ore Bin w/18 ft. Feeder/Conveyor—$7,500. Mancha Battery Loci 18 ga w/bat. & charger—$15,000. Eimco 12B Mucker 18 ga.—$5,000. Mine cars, slushers & more. Will email photos. Call CRAIG (970)560-0685, or send email.
LJantf

Email the owner of this Mine Market Classified Ad


WORKING HARDROCK MILL for sale. Located in North Idaho. Additionally, we have underground mining equipment, a large 150hp jaw crusher, two-deck screen plant, Stedman hammer mill, shaker plant for placer and much more. $75,000 takes everything. Will sell individual units separately. Call or email with questions and for photos. (208)682-3004 or send email.
MJantf

Email the owner of this Mine Market Classified Ad


10x20 JAW CRUSHER
“Boise Iron Works” new brass bushings, jaws have little wear, air-cooled gas engine. Call for pictures. $5,500 OBO or trade for smaller jaw, KIRK (208)420-0649.
bBJan2

SWECO 60” CLASSIFIER
Includes 2 (8MG) 1 (20M) screens—$4,900, located Greeley, CO. Call (970)302-9118.
CJan3

MORSE BROTHERS 4”X6” JAW crusher, model 2000, steel sand, 5hp motor, approx. weight 560 pounds. Denver, Colorado. $5,700. (303)278-2562, (720)402-1264.

JJan1


6” PROLINE DREDGE. Retailed over $10,000. Asking $6,500
 
Twin 9HP Hondas w/GAST PCA10 compressor. 2 - HP500 pumps, swivel tip. Blue pontoons. Used less than a month. Retailed over $10,000. 
Located in Denver, CO
 
 
Call (303)827-3311
CJantf

MONTANA MILL w/CYANIDE PERMIT
Fully-operational and permitted 200 TPD Gravity & Flotation Mill. For sale or JV. (801)369-5500.
aOJantf

PRICES REDUCED TO SELL!
New Wilfley table—$2,400
New 16” impact mill—$1,200
Wave table in excellent condition—$2,000. 
(575)590-0969
HJan1

PORTABLE IMPACT MILLS
6hp, w/reversible hard-faced hammers, with tires & handles. 1 person to lift in truck, reduces 50 lbs. of 1-1/2” rock to 80% 40- in 5 mins. Call for pictures or view on YouTube under Kirk’s Rock Crusher. $2,000 ea. KIRK (208)420-0649.
aBJan2

FLOATING ROCK HOIST, heavy-duty, and custom 8” dredge. For sale, together or separately, by the estate of the designer. Proven performers on the Klamath River. See video, pictures, and specifications at www.klamathrockhoist.com or contact Robert Eastham at (443)867-2827.
EDectf

WANTED—Small used mine locomotive. Diesel, Electric, Air. Any shape or location. Send email or (360)945-1886.
SDec8

Email the owner of this Mine Market Classified Ad


PREMIUM NEW GAS FURNACE (4 pours), LT400, all accessories, 2800° F, $25K. (602)418-2097; (928)502-9477.
aBDec2

JIG WANTED by one jackass miner at hardscrabble. I am mining at Liberty, Washington. I am working old tailings. Please help me. ED LEVESQUE (253)363-3440.

LDec1


MINING EQUIPMENT FOR SALE
 
1. 112” X 42” Round Roaster Oven w/Electric & Gas Fittings, & Motor and Stand.
2. 130” x 77” Rock Classifier (Grizzly) New, 5.5” spacing Road Grader Blades.
3. 159” x 63” Concentrating Table w/Action & Motor.
4. 4.5” x 6.5” Jaw Crusher w/ Motor & Stand.
5. Small Jaw Crusher w/Motor and Stand.
6. 8” x 16” Large Jaw Crusher w/Motor & Stand (Cedar Rapids).
7. 20” x 20” Set of Rolls w/Motor and Stand (Like New, Remanufactured).
8. 15” x 33” Bico Pulverizer w/Stand & Motor. 
9. 930 Caterpillar Front End Loader w/New Tires. 
10. Small Drill Rod Trailer.
11. 11KW Honda Generator w/Electric Start
12. 3 Small Electric Lab Furnaces.
13. 20” x 20” Precious Metals Smelter Oven w/Stand and Electronics. 
14. Water Buffalo (Army) Water Tank on Wheels.
15. Sprague & Henwood Core Drill on Skids & Truck Mounted (BH-263) 
16. 1999 GMC 4x4 Diesel Flat Bed Truck.
17. 200’ of Drill rod, 4 Core Barrels, and tools to run the Rig. 
18. GMC Top-Kick Dump Truck w/New Tires & Side Dumps.
19. (2) 8’ x 40’ Conex Containers.
20. (1) Quality Lab Microscope.
21. 87” x 48” Gold Press w/Stand, Pump & Motor.
22. 122’ x 18” Conveyor w/Belt & Motor. 
23. (3) 18” x 18” triangular P.M. Smelter Pour Containers w/ Table.
24. (1) 24” x 30” Round Smelter Oven w/Hydraulics, Stand, Elec. Motor, and Blower. 
25. (1) Large 49” x 42” Round Smelter Oven w/Stand, Hydraulics, & Elec. Motor, and Blower.
26. (1)-57” x 52” Cone Spiral Jig w/Stand & Elec. Motor.
27. (1) 500 GR Denver Lab Flotation machine w/ stand & Motor.
28. (1) 10” x 32” Electric Lab Grinder/Pulverizer.
29. (2) New Global Hammer Mills w/ extra Hammers.
30. (1) DC Power Supply- 220 Volts, 163 Amps, 60 Cycles, Phase 3 (AC) Input, 8-48 Volts, 1,000 Amps, 48KW, Continuous Duty (DC Output) Serial #181575, S.O. No. A6068.
31. (1) 19’ x 28” Transformer to go with the DC Power Supply.
32. (2) 72’ x 35’ Fiberglass Square Tanks for Cyanide Leaching.
33. (1)36 x 38 Fiberglass Tank for Plating with Aluminum Plates.
34. (1) Finishing Spiral Classifier w/Motor & Stand. 
35. (2) Round 45”x80” & 44”x51” diesel fuel tanks on stands. 
36. Many Other Assorted and Related Mining Tools and Accessories. 
Gordon Ripma 
(561)744-0301 (561)301-5222 
or send email 
Paul Trefzer 
(772)581-0640 (561)262-1371 
 
aRDec2

Email the owner of this Mine Market Classified Ad


WANTED: CORE SPLITTER
In operating condition. DAVE TAYLOR, send email or call (314)808-5858.
TDec3

Email the owner of this Mine Market Classified Ad


FOR SALE OR RENT
PROCESSING FACILITY, crushing, concentrating, leaching, filtering, smelting, full lab, all licenses and permits. 10,000 sq ft. on 20 acres. $2.1M. (602)418-2097; (928)502-9477.
bBDec2

FORECLOSURE SALE
Millsite Plant 10 acres—Fallon, NV. 2,000 sq.ft. Warehouse, with Lab room and loading dock. Separate leach bldg., 40 container storage, Four metal tanks for fluid and water storage, (4,000 gal.) Tailings Pond (never used), 3 water wells, two 70-foot trailers. $125K with terms, or discount for cash offer, or will trade for equipment or property. Contact: send email or call (619)609-0234.
KSep7

Email the owner of this Mine Market Classified Ad


NEFFCO CENTRIFUGE 
FOR SALE BY NEFFCO MINING GOLD AND TECHNOLOGY
 
You can now get your fine gold out of your black sand and also run them behind your jig plant or in your placer mining circuit. Will get 95% of flour gold that you are missing down to 200 mesh. Will pay for itself in no time. Price is $6,000 per standard unit.
 
We are also looking for a good placer mining property to lease or buy. We have the experience and the equipment to get the most gold out of your property.
 
Neffco Mining Gold and Technology 
LARRY NEFF
larryneffco@aol.com; (801)828-6147
NSep6

SANDSCREW: Trio Model TSW-4432 Sandscrew-Dewatering Screw-Washer. 44 inch screw with 32 ft. tub length. Removes silts, clays, sands and slimes; separates water to recycle pond. Capacity 175 TPH. Nearly new, only 200 hours. Location: Wilhoit, AZ. REDUCED to $24,999. MIKE (928)273-2939 or send email.

PNovtf

Email the owner of this Mine Market Classified Ad


PIONEER 30 PORTABLE TROMMEL, up to 30 yards per hour. Hardly used. New $38,500, asking $25,000. Also portable 12’ feed conveyor, missing motor, new $4,800, asking $2,500. Keene rock crusher mounted $4,500. 

LNov3

Email the owner of this Mine Market Classified Ad


MARCY 7’ DIA. X 10” LONG GRATE Discharge Ball Mill, very good pinion and bull gear, bearing blocks and gear guard, new installed liners, 200 HP synchronous motor. For more information, call (575)590-0346 or send email. 
MNov6

Email the owner of this Mine Market Classified Ad


PRO MUSIC FAIRBANKS, ALASKA
Sells gold prospecting equipment and Minelab metal detectors. Please call: (800)478-1994
www.ProMusicAlaska.com

SOcttf


NOME
10-inch suction dredge “Dola Mae” for sale. One of the top producers in the Nome fleet. 50x26 foot platform. 5.9 Cummins diesel. Twin 2014 115HP Yamaha 4-stroke engines. Price of $150,000 is less than one season’s gross. There is no way you could build one like this, and ship it to Nome for this price. For more info, call or text WES at (928)710-8404.
DOcttf

6” PROLINE DREDGE

with fourth-generation double-screen classification. Brand new condition. This is the most advanced 6-inch dredge ever built! $20,000 (US). Images, video and more information can be found at www.goldgold.com/six-inch-dredge-for-sale.html or contact New Era Productions at (530)493-2062.

MSeptf


MINING AND MILLING EQUIPMENT FOR SALE

Stutenroth impact mill, Jaw crushing plant with grizzly, hopper, belt feeder and under conveyor, 4 cyl. diesel-powered on tandem-axle trailer. Large hammer mill, 6 cyl. gas powered. Misc. screw and belt conveyors. 3’x10’ reverse helix concentrators. Hoppers, 8” dredge and more! RICK (661)609-5931.

SDectf


MILLING AND CONCENTRATING
Custom milling by the ton. Head ore max size 8” minus. Possible monthly mill lease for large quantities. Facility located in the Kingman, Az. area. (928)710-3545.
aHAugtf

HAND-OPERATED ROCK CRUSHER

Use in the field or shop. www.crazycrusher.com by Goldquest, LLC.

LAugtf


CUSTOM CRAFTED MINING EQUIPMENT—Small impact crushers, ball mills, etc.  RICK BLOUNT, 3951 W. 16th St. Ave. D, Odessa, TX 79763. Phone: (432)381-1410.

BAug8


24”x40’ RADIAL STACKER CONVEYOR
—$10,625. Power Screen Brand. Other sizes of used (and new) conveyors available. Call (870)269-8788, ask for STEVE or TOM.
IAugtf

RUBBER-LINED 150HP 10”x10” slurry pump with controls, electronic eye, and tank. Approx. 200 hrs. use—$40,000. Superior variable speed grizzly belt feeder. Hopper is 20-ton capacity. 200 hrs. use—$40,000. All located in the Yukon. Send email.

UJultf

Email the owner of this Mine Market Classified Ad


SUPERIOR BELT FEEDER

15-yard capacity, 200 hours use—$40,000. Equipment located in Yukon Territory. Send email.

UJultf

Email the owner of this Mine Market Classified Ad


FOR SALE
Used Hardinge Conical Ball Mill, Model No. 8164; 4-1/2’x16” cylinder length, wet grinding; shell speed: 29 RPM, C,C rotation, 20hp motor; set of new wear plates, unit under power. 
 
CW WOOD MACHINERY, INC.
(513)542-8402
Norman Wood
WJultf

- 42”x22’ Trommel w/hopper (towable) (Low Hrs)(Electric)
- 24’x3’ Conveyor
- 20’x3’ Sluice Box w/ miners moss
- 4’x8’ vibrating gravity table (for black sand/fines) 
- 4’x8’ Shaker sluice
- 30” Twin JIG (needs repair)
- 11’ Grizzly/Screen
- Atlas Copco 52 KV-65KVA Generator (towable)
- Custom-built Transformer Control Box, 3 phase
- 6” Gorman-Rupp diesel powered pump (towable)
 
This is everything you need to deliver pay dirt! We have over $100,000 invested but must make room for other endeavors. This plant definitely has proven to be an excellent plant to recover placer gold as well as black sands. Please contact via text (541)951-7412 or send email. Pics available on request. Asking $45K OBO. MUST SELL!
Jultf

Email the owner of this Mine Market Classified Ad


JINGER'S GOLD-CON FLUID TUBE
Saves Hours of Panning
Assembled $40—Plans $15
(208)699-8128
www.goldfeverminingsupply.com

LMaytf


400 TPH COMPLETE GRAVITY GOLD PLAND, NEW/UNUSED, DELIVERED IN 2015
 
The concentrating plant was delivered and wet-load commissioning was completed in 2015. The plant is currently still new and unused. It was originally designed to process placer/alluvial deposits. All major components are on skids.
 
Plant currently located in Ghana.
 
For complete details, please contact by email. 
PMaytf

Email the owner of this Mine Market Classified Ad


GOLDLANDS SPIRAL CONCENTRATOR:
Microblaster 50, skid-mounted, continuous output, no downtime, nugget sluice, nearly new, only 50 hours run time. Location: Wilhoit, Arizona. $2,995. MIKE (928)273-2939 or send email.
bPMaytf

Email the owner of this Mine Market Classified Ad


LIKE-NEW 2011 30” HORIZONTAL centrifuge—$42,500. (907)440-6354.
FAprtf

200 - 400 MESH

Maximum size reduction of rocks and ores. Collider mill reduces rocks to powder in seconds. Portable trailer mounted or stationary units. Quarter ton to mega tons per hr. Financing available. Check us out at rotarycollidermill.com or call (817)845-9519.

FMartf


WANTED:
WET DRUM MAGNETIC SEPARATORS
in operating condition with feed tanks—CASH BUYER

FOR SALE:
Deister 999 triple table in 40’ trailer with sand screw & controls, very good condition for sale.

LARRY (602)377-3774
Call or send email.

WMartf

Email the owner of this Mine Market Classified Ad


EXCITING NEW BREAKTHROUGH!
Now you CAN take it with you!
Recirculating rocker box
of the 21st Century.
No gas, oil, or battery.
Everything needed to get gold in
one easy-to-carry 20 lb. package
that’s on your side and works for you.
WWW.GOLDCRADLE.COM
(503)357-3697
LMartf

MINING EQUIPMENT & SUPPLIES FOR LESS
Power sluices, dredges, drywashers, trommels, rock crushers, detectors, furnaces, fine gold recovery & more. FREE SHIPPING with $350 purchase.
Mar12

$$ BUY FACTORY DIRECT & SAVE $$
2'x4' Lab Tables
4'x8' Concentrating Tables
Mineral Jigs: 12"x12", 24"x24" & 42"x42" Conveyor Belts: 18", 24" and larger
Vanner Corduroy Belts: 12", 24", 36" & 48"
Hoppers: All Sizes
Amalgamators: From 20 to 500 lb
Feeders: Belt, Plate and Table
Shaker Screens: 12" to 48" wide
Also available: Used Mining Equipment
Will CUSTOM BUILD to your specs or recondition your equipment.
TO GET THE MOST
FOR YOUR MONEY
Call or Write:
SILVER SPRINGS
MINING EQUIPMENT
15 Davis Rd./PO Box 239
Silver Springs, NV 89429
Phone: (775) 577-2192
Fax: (775) 577-2626
Febtf

86332 FOR SALE
Aker Core Drill: model TH; A & E rod.
Trommel: 15 ft. long, 30 in. dia. drum;
6 ft. screens, 3/4 & 1/4 in.; ore bin &
hydraulic feed; trailer mounted.
12B Mucker.
G-D Air-Leg Drills: 83 & 63
Cedar Rapids Jaw Crusher: 10 x 24 in.; roller bearing.
Single Drum Electric Mine Hoist: 50 hp.; 20 in. dia.; 24 in. face, 6 in. flanges.
Young Buggy.
CHUCK: (928)713-5953

WJan4


I HAVE A NEW ICON 150 GRAVITY Concentrator for sale. Used only once. It’s in perfect shape and is complete, still on the pallet. I’m just south of Houston, TX. $7,000. Would be willing to trade for a conveyor or big jaw crusher. JIM (832)473-6402 or send email.

EDectf

Email the owner of this Mine Market Classified Ad


FOR SALE:

•2’x4’ UHF Table, new.  --  $4,000

•4’x8’ UHF Table, new.  --  $7,000

•Peerless Portable Feed Conveyor—32”x50’, w/ hydraulic raise/lower. Includes plate feeder. No motors or belt.  --  $7,000

•Bico Pulverizer, Model UA—3-Phase motor direct drive, mounted on heavy-duty roll around bench.  --  $3,500

We will load on your truck.
FOB Nevada City, CA.

Contact: JASON (530)265-4591 or send email.

WDectf

Email the owner of this Mine Market Classified Ad


NOME
10-inch suction dredge “Dola Mae”
50-foot catamaran, (2) new 115 HP Yamaha 4-stroke engs.
5.9 Cummins diesel, 6X8 Berkeley water pump, new 6212 Garmin GPS. 16-wheel trailer. Sleeping quarters.
$155K
Send email or
call WES (928)710-8404.

DSeptf

Email the owner of this Mine Market Classified Ad


STUTENROTH IMPACT MILL—$4,500

On frame, with axle, in Colorado. Email only.

WOcttf

Email the owner of this Mine Market Classified Ad


ANTIQUE AIR COMPRESSOR
Ingersoll Rand, runs brand new—$6,000. Also: Ball Mill and table. (760)485-2694.

RSeptf


GOLD MISER
PROSPECTING SUPPLIES

All your gold hunting needs. Dredges, detectors, drywashers, highbankers. 34403 US Hwy 2, Libby, MT 59923, (406)293-8679. Let us be your dealer.

Jantf


 

Click to see the NEW Fisher Gold Bug PRO!
Click to watch Video
Sonic Concentrator--Advanced Concentration Technology
Professionally engineered picks for prospectors, miners & treasure hunters
Shipping available nationwide!